Dangerous Goods Shipping India: A Compliance Checklist

Dangerous Goods Shipping India: A Compliance Checklist

A drum of solvent and a carton of garments can leave the same factory on the same morning. Only one of them can be stopped at the port gate because the UN number on its label does not match the declaration. For chemical, dye, resin and agrochemical exporters, that is the everyday reality of dangerous goods shipping India. Several parties check the rules, and one small inconsistency can hold a container for days.

Most of these delays are avoidable. This guide explains how IMDG classification works, the DG cargo documentation every shipment needs, the packaging rules that apply, and a checklist exporters can use before cargo leaves the factory.

Why Dangerous Goods Shipping in India Gets Held at the Gate

Most DG holds have nothing to do with unsafe cargo. They happen because the Safety Data Sheet, the drum label and the shipping bill describe the same product in different ways.

The shipping line, the terminal and customs each review a different document, and any one of them can stop the box. While the exporter waits for a corrected SDS or fresh labels, free time keeps running and the vessel cut-off moves closer. The fix is usually simple. Finding the mismatch after the truck has left the factory is what makes it expensive.

IMDG Classification: The Starting Point for Hazardous Cargo Export

Every hazardous cargo export by sea is governed by the International Maritime Dangerous Goods (IMDG) Code. The current edition, Amendment 42-24, became mandatory on 1 January 2026, and the Directorate General of Shipping applies the Code to sea transport in India.

Classification gives a product three identifiers that every later document must repeat exactly: its hazard class, its four-digit UN number and its packing group (I for high danger, II for medium, III for low). Together with the Proper Shipping Name, these decide packaging, labels, stowage on board and terminal acceptance.

IMDG Class What it covers Common examples from Indian exporters
Class 1
Explosives
Fireworks, safety fuses, cartridges
Class 2
Gases
Aerosols, refrigerant gases, compressed gas cylinders
Class 3
Flammable liquids
Paints, printing inks, solvents such as toluene
Class 4
Flammable solids and reactive substances
Sulphur, calcium carbide, certain metal powders
Class 5
Oxidisers and organic peroxides
Calcium hypochlorite, hydrogen peroxide solutions
Class 6
Toxic and infectious substances
Many pesticides, aniline, some dye intermediates
Class 7
Radioactive material
Medical isotopes, industrial gauges
Class 8
Corrosives
Sulphuric acid, caustic soda solution, hydrochloric acid
Class 9
Miscellaneous dangerous goods
Lithium batteries, environmentally hazardous substances

The classification comes from Section 14 of the product’s SDS. If that section is blank or was written only for road transport, resolve it before booking. Check marine pollutant status as well, because a substance that seems harmless on land can still fall under Class 9 at sea.

DG Cargo Documentation for Dangerous Goods Shipping in India

Safety Data Sheet

The Safety Data Sheet should be issued by the manufacturer, follow the 16-section GHS format and reflect the product's current formulation. Carriers often question outdated SDS copies.

DG Declaration

The DG declaration, usually filed on the Multimodal Dangerous Goods Form, records the UN number, Proper Shipping Name, class, packing group, flashpoint where relevant, marine pollutant status, quantity and an emergency contact. The shipper signs it and carries legal responsibility for its accuracy.

Container Packing Certificate and Supporting Papers

The container packing certificate confirms that the box was packed, segregated, secured and placarded according to the IMDG Code, and it is signed by the person who supervised stuffing. Keep the UN packaging test certificate from your drum or IBC supplier ready too, along with the commercial invoice, packing list and shipping bill. Their product descriptions and HS codes must match the SDS.

Packaging, Marking and Placarding Requirements

Dangerous goods must travel in UN-specification packaging that has passed drop, stacking, and leak-proofness tests. The letter X, Y, or Z in the UN mark shows the highest packing group the packaging is approved for, so a Packing Group II product in a drum marked Z will be rejected.

Each package needs the UN number, the Proper Shipping Name and a class label of at least 100 mm square. The container needs placards of at least 250 mm square on all four sides, plus the marine pollutant mark where it applies.

Carrier Approval and Port Acceptance for DG Cargo

A DG booking is confirmed only after the shipping line’s dangerous goods desk approves the declaration, which can take several working days. Some lines refuse certain classes entirely or limit how many DG containers each vessel can carry.

Terminals apply their own DG cut-offs, and some high-risk classes must be delivered directly to the ship side. Treat carrier approval and the terminal cut-off as two separate deadlines, because missing either one means waiting for the next sailing.

Dangerous Goods Shipping India Compliance Checklist

How Parikh Forwarders Supports DG Exporters

Parikh Forwarders has supported chemical, industrial and general cargo exporters through Mundra, Kandla, Hazira and Pipavav since 1989. The team cross-checks the SDS, declaration, labels and shipping bill before booking, coordinates customs clearance, and moves 20 ft and 40 ft containers between the factory and the port in its own vehicles.

Explore customs clearance services

Conclusion

Dangerous goods shipping India runs smoothly when classification, documents, packaging and approvals all tell the same story. Most holds come from small inconsistencies rather than unsafe cargo, so a careful review before booking saves far more time than a correction at the gate.

If you are moving hazardous cargo through Gujarat ports, contact Parikh Forwarders at +91 99241 44111 or info@parikhforwarders.com to discuss your next DG shipment.

Frequently asked questions (FAQs)

1. What documents are required for dangerous goods shipping in India?

A typical DG export needs a Safety Data Sheet, DG declaration, container packing certificate, UN packaging test certificate, commercial invoice, packing list and shipping bill. Some products need additional permits depending on the commodity.

2. Who decides the IMDG class of a product?

The manufacturer classifies the product based on its properties and records it in Section 14 of the SDS. The shipper is responsible for declaring it correctly.

3. How long does DG approval from a shipping line take?

It varies by carrier, hazard class and vessel, so allow several working days.

4. Can non-hazardous chemicals be shipped as general cargo?
Usually yes, but many shipping lines ask for a non-DG declaration supported by the SDS to confirm the product is not regulated under the IMDG Code.